Milwaukee 2566-20 vs 2567-20: Which M12 Ratchet? (November 2026)
The 2567-20 wins for most readers because its 3/8 in drive and 35 ft-lb of torque cover everyday automotive and assembly work. The 2566-20 is the better buy for tight 1/4 in fasteners and cramped engine bays.
On this page (10 sections)
- Milwaukee 2566 20 vs 2567 20: the quick verdict
- The two ratchets side by side
- Drive size decides the sockets you can use
- Head profile and access in tight spots
- Torque and speed: how much do they matter?
- Kit or bare tool: what's in the box
- Who should buy the 2567-20?
- Who should buy the 2566-20?
- How the 2566-20 and 2567-20 compare to the 2457-20 and 2557-20
- The verdict: 2567-20 for most, 2566-20 for tight spots
The Milwaukee 2567-20 is the better ratchet for most readers, and the 2566-20 is the better second ratchet for tight spots. In the Milwaukee 2566 20 vs 2567 20 choice, the 3/8 in drive on the 2567-20 does more everyday work, while the 1/4 in 2566-20 wins on access.
Both are M12 FUEL brushless high speed ratchets rated at 450 RPM. The differences come down to drive size, head profile and what ships in the box.
That means you aren't picking between fast and slow. You're picking which sockets you want in your hand and how much room the head needs.
Best for general repairMilwaukee 2567-20 M12 FUEL 3/8 in High Speed Ratchet
Best for tight quartersMilwaukee 2566-20 M12 FUEL 1/4 in High Speed Ratchet
Milwaukee 2566 20 vs 2567 20: the quick verdict
Buy the 2567-20 for general repair and the 2566-20 for tight 1/4 in work. The 3/8 in drive is the deciding factor for most people, because it fits the socket sets already in their toolbox.
The 2567-20 is rated at 35 ft-lb and weighs 1.8 lb. It's a bare tool with a compact head, so it slots into an M12 collection you already own.
The 2566-20 is also a bare tool at 1.8 lb. Its edge is a 0.75 in head profile and up to 40 ft-lb from a 1/4 in drive.
Neither ratchet includes a battery or charger. If you're starting from zero, the kit version of the 3/8 in ratchet makes more sense than buying either bare tool first.
The kit model shares the same 450 RPM and 35 ft-lb rating as the bare 2567-20, so you give up nothing in performance to get the power in the same order. The bare-tool box is the right call only when you already own M12 batteries and a charger.
Our Milwaukee 2457-20 review covers the older non-FUEL ratchet, which is the cheapest way into the M12 ratchet line.
The two ratchets side by side
They look alike and share a 450 RPM motor, but the drive size and head profile split them apart. Use this table to see where each one lands.
| Spec | Milwaukee 2567-20 | Milwaukee 2566-20 |
|---|---|---|
| Drive size | 3/8 in | 1/4 in |
| Max torque | 35 ft-lb | Up to 40 ft-lb |
| Speed | 450 RPM | 450 RPM |
| Head profile | Compact head | 0.75 in |
| Weight | 1.8 lb | 1.8 lb |
| Tool length | 10.8 in | 2.99 in |
| Power source | M12 battery | M12 battery |
| What's included | Bare tool | Bare tool |
The length row needs a word of caution. The 10.8 in figure for the 2567-20 reads like the full tool length, while the 2.99 in figure for the 2566-20 reads more like the head or body depth than the whole ratchet.
Treat the 10.8 in number as the better guide to how either tool feels in a drawer.
Both use the same M12 battery platform. The M12 ratchet vs M12 FUEL ratchet comparison explains what the FUEL brushless motor actually changes if you're moving up from an older model.
How the bodies compare in the hand
Both ratchets weigh the same 1.8 lb, so balance and drive size decide how they feel. The 2566-20 puts its weight behind a thin head, which matters when you're working overhead.
The 2567-20 spreads that weight across a 3/8 in drive. A bigger socket set on the end changes the balance more than the tool itself does.
If you spend long stretches under a dash or inside a wheel well, the thinner head on the 2566-20 reduces the angle you need. That's the real reason to own it.
The 10.8 in length on the 2567-20 is the number to picture when you plan a storage drawer. A longer body gives you more reach into an engine bay, while the thinner 2566-20 trades some of that reach for head clearance.
Drive size decides the sockets you can use
The 2567-20 takes 3/8 in sockets; the 2566-20 takes 1/4 in sockets. Your existing socket set is the first thing to check before you buy either one.
Most home mechanics own more 3/8 in sockets than 1/4 in. That single fact makes the 2567-20 the more practical first ratchet for car work.
The 2566-20 suits jobs where 1/4 in fasteners are the norm. Interior trim, small engine covers and light assembly work all lean toward the smaller drive.
The end style and head style are identical on both tools, socket end and hex head respectively. The jaw capacity differs with the drive, though: the 2567-20 is listed at 0.75 in and the 2566-20 at 0.38 in.
Neither figure is a reason to pick one over the other, but it tells you how the heads are built.
When a 3/8 in drive earns its place
Pick the 2567-20 when your work centers on underhood and suspension fasteners. Those are mostly 3/8 in territory, and the 35 ft-lb rating matches them well.
Brake caliper bolts, valve covers and battery terminals are typical 3/8 in jobs. The ratchet spins them out at 450 RPM, which saves time on long threads.
You'll still finish the final tightening by hand. A cordless ratchet is a speed tool, not a torque wrench.
When a 1/4 in drive is the right call
Pick the 2566-20 when small fasteners and cramped access set your day. A 1/4 in drive reaches places a 3/8 in socket simply won't fit.
Interior panels, dash trim and small brackets are the natural targets. The up to 40 ft-lb rating is more than those fasteners need, so there's headroom.
Skip the 2566-20 as your only ratchet if your work is mostly under the hood. Adapting 3/8 in sockets down to 1/4 in adds length and undoes the thin head advantage.
Head profile and access in tight spots
The 2566-20's 0.75 in head profile is the reason to pick it over the 2567-20. A thinner head changes which fasteners you can reach at all.
Milwaukee describes the 2566-20 as having a compact head design for confined areas. That's the feature that matters when a strut tower or firewall blocks a normal ratchet.
The 2567-20 is also described as compact. The difference is one of degree, and the 0.75 in figure on the 2566-20 is the only hard number either tool gives for head size.
The 0.75 in head profile also appears as the spanner wrench hook depth on both listings. On the 2566-20 that dimension lines up with the head thickness, which is why it squeezes into gaps a standard ratchet can't enter.
If you regularly work on transverse engines or packed engine bays, the thinner head pays for itself quickly. If your work is open and accessible, the 3/8 in drive is worth more than the profile.
Torque and speed: how much do they matter?
Both ratchets run at 450 RPM, and their torque ratings are close enough that drive size matters more. The 2567-20 is rated at 35 ft-lb; the 2566-20 at up to 40 ft-lb.
That 5 ft-lb gap won't change most jobs. Neither tool is meant to break loose rusted bolts or torque critical fasteners to spec.
The 450 RPM figure is the real selling point. Milwaukee calls the 450 RPM figure best-in-class, and it's what turns a long thread run into a few seconds of trigger pull.
Speed like that saves your wrist on jobs with dozens of bolts. It also means you should keep the trigger light near the end of a thread.
Reading the two torque ratings the same way
The 2567-20's 35 ft-lb is a flat rating, while the 2566-20's 40 ft-lb is listed as up to. That wording matters when you compare the two numbers directly.
A flat rating tells you the torque the tool delivers in normal use. An up-to figure is closer to a ceiling, so the real gap between these ratchets is smaller than five foot-pounds suggests.
Neither number puts the tool in impact wrench territory. Plan on breaking stubborn fasteners by hand and letting the ratchet run them in or out.
Kit or bare tool: what's in the box
Both the 2566-20 and 2567-20 are bare tools, so batteries and charger cost extra. The kit version of the 3/8 in ratchet is the one to buy if you're new to M12.
The M12 FUEL 3/8 in High Speed Ratchet Kit includes 2 batteries, a charger and a case. That's the cheapest way to get a complete setup in one order.
If you already own M12 tools, the bare tools are the smarter buy. One battery and charger serve your drill, impact driver and ratchet.

The kit version of the 3/8 in ratchet: 2 batteries, a charger and a case in one order, so you can skip buying M12 power separately.
See it on AmazonA bare tool plus a spare battery often costs more than the kit when you're starting out. Check what you already own before deciding.
Who should buy the 2567-20?
Buy the 2567-20 if you want one M12 ratchet that handles most of your work. It's the better all-rounder thanks to the 3/8 in drive and 35 ft-lb rating.
Home mechanics, DIYers and anyone already on the M12 platform get the most from it. The 3/8 in drive matches the sockets most people already have.
It also suits assembly and light maintenance where fasteners are mid-sized. The compact head still gets into tighter spots than a full-size air ratchet.
Skip it if your work is almost entirely small 1/4 in fasteners in very tight spaces. That's the one case where the 2566-20 earns its place as the first purchase.
Who should buy the 2566-20?
Buy the 2566-20 if tight access and small fasteners define your work. Its 0.75 in head profile and 1/4 in drive make it the specialist of the pair.
It fits interior work, small engine repair and confined assembly jobs. The up to 40 ft-lb rating gives it more headroom than those fasteners need.
It's also a good second ratchet for someone who already owns the 2567-20. Together they cover both socket ranges without adapters.
Skip it as your only ratchet if you work under the hood. The 1/4 in drive limits your socket coverage more than the thin head helps in open space.
Our guide to which M12 ratchet is best walks through the rest of the lineup if neither of these is the right fit.
How the 2566-20 and 2567-20 compare to the 2457-20 and 2557-20
The FUEL 2566-20 and 2567-20 are the faster pair; the older 2457-20 and 2557-20 are the budget route. Speed is the main thing you pay for when you move up.
The 2457-20 is the non-FUEL 3/8 in ratchet, and its review here covers what it gives up. The 2457-20 vs 2557-20 comparison sets the older 1/4 in and 3/8 in models against each other.
If you already own one of the older ratchets, the jump to a FUEL high speed model is mostly about RPM. If you're buying your first M12 ratchet, start with a FUEL model.
Which one should a first-time buyer choose?
A first-time M12 ratchet buyer should start with the 2567-20. The 3/8 in drive is the more useful default, and the kit version removes the battery question.
The 2566-20 makes sense as an addition later. Buying it first tends to leave you adapting sockets or buying a second set.
That's the simplest way to settle the Milwaukee 2566 20 vs 2567 20 question. Match the drive to your sockets and the head to your workspace.
The verdict: 2567-20 for most, 2566-20 for tight spots
Get the Milwaukee 2567-20 for general repair and the 2566-20 only if tight 1/4 in fasteners are your daily work. The 3/8 in drive and 35 ft-lb rating make the 2567-20 the more useful single ratchet for most readers.
The 2566-20 is the specialist. Its 0.75 in head profile and up to 40 ft-lb from a 1/4 in drive are worth paying for when access, not socket coverage, is your problem.
If you're starting from zero on the M12 platform, buy the kit version of the 3/8 in ratchet first. Add the 2566-20 later once you know you keep hitting confined spots.
Either way, you're buying a 450 RPM brushless ratchet that saves real time over a hand ratchet. The M12 ratchet vs M12 FUEL ratchet guide explains the motor difference if you want the full picture.
Frequently asked questions
Is the 2566-20 or 2567-20 better for brake calipers?
The 2567-20 is the more useful brake caliper tool, because its 3/8 in drive matches the sockets used on most caliper bolts. The 2566-20 works on smaller fasteners and confined areas, so keep it as the second ratchet rather than the only one.
Can I use 3/8 in sockets on the 2566-20?
Only with a 1/4 in to 3/8 in adapter, which adds length to the head and defeats the point of the thin 0.75 in profile. If your sockets are 3/8 in, buy the 2567-20 instead of adapting the smaller ratchet.
Do both ratchets include a battery?
No. The 2566-20 and 2567-20 are both bare tools, so you need a separate M12 battery and charger.
The M12 FUEL 3/8 in High Speed Ratchet Kit is the version sold with 2 batteries, a charger and a case if you are starting fresh.
Does the 2567-20 have more torque than the 2566-20?
The 2567-20 is rated at 35 ft-lb and the 2566-20 at up to 40 ft-lb. Torque matters less than drive size for most work: the 2567-20 takes the sockets you already own, while the 2566-20 trades socket range for a thinner head.
Which ratchet is better for an M12 owner who wants one ratchet only?
Buy the 2567-20 if you want a single ratchet. Its 3/8 in drive covers more sockets and its 35 ft-lb handles typical underhood and assembly fasteners.
Add the 2566-20 later if you keep running into very tight spots.
About this guide: Our look at Milwaukee 2566-20 vs 2567-20 M12 ratchets draws on maker specs, materials and what owners report. See how we research.



