Review

Ryobi PCL265 Impact Wrench Review: Worth It? (November 2026)

Updated on · By the ChattyCrock team

The Ryobi PCL265 is a solid 1/2 in. impact wrench for ONE+ owners who already have 18V batteries and need 375 ft-lb of fastening torque. Buy it as a bare tool if you're already in the system; pick a kit brand if you're starting from nothing.

FIRE ROSE Ryobi PCL265 18V ONE+ Cordless 1/2 in., the Ryobi PCL265 18V ONE+ impact wrench

In this review

FIRE ROSE Ryobi PCL265 18V ONE+ Cordless 1/2 in.

Best for ONE+ battery owners9.5/10

See it on Amazon
On this page (8 sections)
  1. The Ryobi PCL265 at a glance
  2. Who should buy the Ryobi PCL265?
  3. The specs that matter in daily use
  4. Setting up the PCL265 for the job
  5. Care and maintenance for a cordless impact wrench
  6. The trade-offs of the Ryobi PCL265
  7. How the Ryobi compares to the alternatives here
  8. Verdict: is the Ryobi PCL265 worth it?

The Ryobi PCL265 is a sensible buy for anyone already invested in 18V ONE+ batteries. It delivers 375 ft-lb of fastening torque and 3,100 impacts per minute in a compact 1/2 in. body, and it runs on the batteries and chargers you already own.

That combination is hard to beat on value if the rest of your garage is green.

This Ryobi PCL265 impact wrench review covers the specs that matter, where the tool fits in real work, and how it stacks up against the DeWalt and Craftsman alternatives below. If your lug nuts and light truck bolts are the main jobs, the Ryobi earns its place.

If you're starting from zero batteries or pulling heavy diesel wheels, keep reading before you buy.

The Ryobi PCL265 at a glance

The PCL265 is a bare-tool 1/2 in. impact wrench built for the ONE+ platform. Ryobi puts 375 ft-lb of fastening torque into a body that's 7 in. long and about 4.2 lb, so it's easy to handle around a car or truck.

1

FIRE ROSE Ryobi PCL265 18V ONE+ Cordless 1/2 in.: Best for ONE+ battery owners

FIRE ROSE Ryobi PCL265 18V ONE+ Cordless 1/2 in., the Ryobi PCL265 18V ONE+ impact wrench
9.5/10Our score
  • 375 ft-lb fastening torque
  • 3,100 impacts per minute
  • 0–2,700 RPM variable speed trigger
  • On-board LED worklight
  • Tool only

A bare-tool impact wrench that puts mid-range torque into the 18V ONE+ batteries you already own. The 1/2 in. friction ring anvil makes socket changes quick.

See it on Amazon

Pros

  • 375 ft-lb is enough for most lug nuts and light truck work
  • Runs on all 18V ONE+ batteries and chargers
  • Variable speed trigger from 0 to 2,700 RPM
  • LED light for dim wheel wells and engine bays

Cons

  • Tool only, so battery and charger cost extra
  • No multi-mode speed selector like the DeWalt kit
  • Not the choice for heavy diesel or rusted fasteners

The variable speed trigger runs from 0 to 2,700 RPM and delivers 3,100 impacts per minute. An on-board LED worklight throws light into wheel wells and engine bays, which matters more than most people expect when you're working under a car at dusk.

The 1/2 in. anvil uses a friction ring so sockets slide on and off quickly.

The headline is the battery compatibility. This tool works with all 18V ONE+ batteries and chargers, so if you already own a Ryobi drill, trimmer or saw, you're buying a wrench rather than a whole new system.

That's the strongest reason to choose it.

What's in the box

You get the wrench itself. That's it.

The battery and charger are sold separately, and Ryobi makes that clear in the product name. Budget for a battery if you don't own one, or buy a kit-style tool from a brand that includes the power source.

Who should buy the Ryobi PCL265?

Buy the PCL265 if you already own 18V ONE+ batteries and your fastening work is moderate. That means lug nuts on cars and light trucks, brake caliper bolts, suspension hardware, lawn equipment and trailer wheels.

The 375 ft-lb rating covers these jobs when you use the right sockets and tighten in stages.

Skip it if your daily work involves heavy diesel wheels, rusted farm equipment or industrial bolts. Those need more torque than this tool offers.

Skip it as well if you're starting with no batteries, since the kit price pushes the total cost toward brands that include a battery.

The size also matters. A 7 in. body is short enough to work in tight spots around wheel arches and suspension.

If you mostly do engine bay work where a lighter tool helps, the compact frame is a plus.

Who should pick something else

Heavy-duty users should look at the DeWalt kit below. If you want one tool that covers both moderate and heavy fastening, the extra torque in the DeWalt pays for itself quickly.

Ryobi owners who already have the batteries have the clearest case for the PCL265.

The specs that matter in daily use

The 375 ft-lb of fastening torque is the number to focus on, and it's enough for most home and light truck work. Fastening torque is what the tool delivers when tightening.

The 3,100 impacts per minute figure tells you how fast the anvil hammers. Higher impact rates break stubborn fasteners loose more quickly, but the real test is whether the tool has the torque to move them at all.

Ryobi pairs the torque with a 0 to 2,700 RPM trigger so you can feather the speed for delicate work.

The 1/2 in. square drive takes standard impact sockets. The friction ring anvil means you don't need to press a pin to release sockets, which speeds up changes when you're swapping between lug sizes.

At 4.2 lb and 7 in. long, the tool sits in the mid-range for weight. It's light enough to hold overhead for brake work but heavy enough to feel planted on a lug nut.

Speed control and the LED light

The variable speed trigger lets you start slow and ramp up, which helps when threading lug nuts by hand before the impact takes over. The LED worklight is a practical addition for dark wheel wells.

It doesn't replace a work light, but it's there when you need a hand free.

Battery platform reality

The tool's value depends on the batteries you already own. ONE+ batteries come in several capacities, and a larger pack gives more runtime while adding weight.

If you have a larger ONE+ pack from another Ryobi tool, this wrench benefits from it.

Setting up the PCL265 for the job

Charge a ONE+ battery and fit an impact-rated socket before you start. The tool is bare, so the first step is choosing a battery you already own.

A larger pack lasts longer on repeated lug nut jobs but makes the tool heavier to hold.

Slide the socket onto the 1/2 in. anvil until the friction ring grips it. Pull on it to confirm it's seated.

Impact sockets are thicker and softer than chrome sockets, and chrome ones can crack under repeated hammering, so keep the two types separate in your toolbox.

Set the socket on the fastener by hand and turn it a few threads before squeezing the trigger. Starting the nut by hand prevents cross-threading and lets the impact do the work once the nut is seated.

Keep the trigger feathered at first. The variable speed control is there so you can run the nut down slowly and then let the impacts finish the job.

Let the tool do the work rather than leaning on it.

Torque and tightening practice

Use a torque wrench for final tightening on lug nuts and critical fasteners. An impact wrench runs nuts down fast, but it can over-tighten them if you keep squeezing.

Run them snug with the wrench, then finish to the vehicle's spec by hand.

Check your lug nut torque spec in the vehicle manual. The PCL265's 375 ft-lb is plenty to reach most passenger car and light truck specs, but the final number should come from a torque wrench, not feel.

Care and maintenance for a cordless impact wrench

Keep the anvil clean and the battery charged and the PCL265 will handle regular home and automotive work without much fuss. Wipe the anvil and socket area after each job to clear grit and metal dust.

Grit in the friction ring makes socket changes stiff.

Store the tool in a dry place. The ABS body and powder-coated finish resist everyday garage conditions, but moisture and dust still shorten tool life.

A case or drawer keeps it clean.

Check the battery contacts for corrosion and keep spare packs charged. A battery that sits empty for months loses capacity.

Rotate your ONE+ packs between tools so each one gets used.

Inspect the socket for cracks before each use. A cracked impact socket can split under load.

Replace worn sockets rather than pushing them.

What not to do

Don't use the tool as a breaker bar. Don't drop it on concrete or use it in wet conditions.

Don't force a socket that doesn't fit the anvil. These habits damage the anvil and the impact mechanism.

The trade-offs of the Ryobi PCL265

The biggest trade-off is the bare-tool packaging. The PCL265 doesn't include a battery or charger, so the sticker price isn't the full cost unless you already own ONE+ batteries.

That's fine for existing Ryobi users and less attractive for first-time buyers.

The second trade-off is torque headroom. At 375 ft-lb, this tool covers moderate work well but runs out of steam on heavy diesel wheels, rusted suspension bolts and industrial fasteners.

The DeWalt kit below more than doubles the fastening torque and adds breakaway capability.

There's also no multi-mode speed selector. You get a variable speed trigger but not the preset modes that some rivals offer for different fastener sizes.

For most home users the trigger is enough, but pros who switch between jobs constantly may want more control.

The 4.2 lb weight is reasonable for the class. It's not the lightest 1/2 in. impact wrench, but it's light enough to use overhead for brake and suspension work.

Where the Ryobi makes the most sense

If you own ONE+ batteries, the trade-offs shrink. The tool becomes a low-cost addition to a system you already use, and the torque covers the jobs most home mechanics tackle.

The bare-tool setup is a feature in that case, not a drawback.

How the Ryobi compares to the alternatives here

The DeWalt DCF900P1 kit is the heavy-duty pick among these three, while the Craftsman CMCF940M1 sits in the middle. The Ryobi wins on battery platform value for ONE+ owners.

Each one has a clear buyer.

DeWalt 20V MAX Cordless Impact Wrench

The DeWalt kit is the choice when torque and control matter more than platform loyalty. It delivers 1,030 ft-lb of max fastening torque and 1,400 ft-lb of breakaway torque, well beyond the Ryobi.

That's the range you need for heavy diesel wheels and rusted bolts.

It ships as a kit with a 5.0Ah battery and charger, so it's ready to work out of the box. The four-mode speed settings and precision wrench control help prevent over-tightening and fastener run-off.

A battery guard shock-absorbing connection reduces wear on the pack. The DeWalt backs it with a 3-year limited warranty.

For more on how it handles heavier work, our DeWalt DCF900B review covers the bare-tool version of the same platform. The kit is the better buy for most people because it includes the battery.

Craftsman V20 RP Cordless Impact Wrench

The Craftsman kit is the middle-ground pick for buyers who want a battery in the box and more torque than the Ryobi. It delivers up to 700 ft-lb of tightening torque and up to 1,000 ft-lb of breakaway torque from a brushless motor.

It comes with a 4.0Ah battery, charger and soft bag. The three-speed settings and variable speed trigger give you control, and the hog ring anvil makes socket changes easy.

The glass-filled nylon housing adds protection in an automotive environment. Craftsman backs it with a 3-year limited warranty.

The Craftsman is heavier than the Ryobi and costs more as a kit. It suits someone who wants one tool to cover moderate and heavier work without adding a second battery platform.

Where a cordless ratchet fits instead

If your work is mostly light fastening in tight spots, a cordless ratchet may serve you better than an impact wrench. A ratchet turns bolts smoothly without the hammering action, which suits assembly and small hardware.

Our cordless ratchet vs impact wrench comparison explains when each tool is the right call.

For a closer look at ratchet options, the DeWalt ATOMIC ratchet vs XR comparison and our DeWalt DCF513 review cover two popular choices in that category.

Verdict: is the Ryobi PCL265 worth it?

Buy the Ryobi PCL265 if you already own 18V ONE+ batteries and need moderate torque. The 375 ft-lb rating, 3,100 impacts per minute and 0 to 2,700 RPM trigger cover lug nuts, brake work and light truck jobs.

The LED light and friction ring anvil make daily use easier.

For ONE+ owners, it's the lowest-cost way into a 1/2 in. impact wrench.

Skip it if you're starting with no batteries or pulling heavy diesel wheels. In those cases the DeWalt kit is the better buy, with its 1,030 ft-lb fastening torque, 1,400 ft-lb breakaway torque and included battery.

The Craftsman sits between the two for buyers who want a kit and more torque than the Ryobi.

If you already have the green batteries, this Ryobi PCL265 impact wrench review lands on a clear buy. Check your lug nut torque specs and socket sizes before the first job, and use a torque wrench for the final tighten.

Frequently asked questions

Is the Ryobi PCL265 impact wrench powerful enough for lug nuts?

For most passenger cars and light trucks, yes. It delivers 375 ft-lb of fastening torque, which covers common lug nut specs when you use the right socket and tighten in stages.

For heavy diesel wheels or badly rusted bolts, step up to a higher-torque tool.

Does the Ryobi PCL265 come with a battery and charger?

No. It's sold as a bare tool, so the battery and charger are separate.

If you already own 18V ONE+ batteries from other Ryobi tools, you can use them here and save on the kit price.

What size sockets fit the Ryobi PCL265?

It has a 1/2 in. square drive with a friction ring anvil, so it takes standard 1/2 in. impact sockets. Use impact-rated sockets rather than chrome ones, since chrome can crack under repeated impact loads.

How does the Ryobi PCL265 compare to the DeWalt DCF900P1?

The DeWalt kit brings far more torque at 1,030 ft-lb fastening and 1,400 ft-lb breakaway, plus four speed modes and a battery in the box. The Ryobi is lighter and simpler.

Pick the Ryobi if you're already in the ONE+ system and torque needs are moderate.