Best picks

Best 1/2 Cordless Impact Wrench: Top 9 Picks (November 2026)

Updated on · By the ChattyCrock team

The best 1/2-inch cordless impact wrenches include the DEWALT 20V MAX Cordless Impact Wrench (best overall), the Seesii Impact Wrench 665 FT-LBS for the longest runtime, and the DEWALT 20V MAX Cordless Impact Wrench for the hardest bolts.

On this page (9 sections)
  1. The best 1/2 cordless impact wrenches for each job
  2. How these 1/2-inch impact wrenches compare
  3. How we compared these wrenches
  4. Which torque level do you actually need?
  5. Should you buy a bare tool or a kit with batteries?
  6. What do the speed settings and control modes do?
  7. How much does body size affect where you can work?
  8. 1/2-inch or 3/4-inch drive: which should you buy?
  9. Verdict: which 1/2 cordless impact wrench should you buy?

The best 1/2 cordless impact wrench for most people is the DEWALT DCF891B, with 600 ft-lbs of fastening torque and 800 ft-lbs of breakaway torque in a compact, lightweight body. Buy the CRAFTSMAN kit if you want a battery in the box, or the Milwaukee 2962-20 if precise torque control matters more than raw power.

A 1/2-inch drive handles wheel lugs on cars and light trucks, plus pipe flanges, concrete anchors and heavy assembly work. Choose your pick by the torque your bolts need and by whether you already own batteries in that brand's line.

The nine wrenches below split into three groups. High-torque models reach 1000 ft-lbs or more for stubborn or large fasteners.

Mid-range models land near 450 to 700 ft-lbs for daily car and shop work. Compact models squeeze into tight spaces.

Our score weighs specs, features and buyer feedback against what you're shopping for.

Our picks at a glance

  1. 1 DEWALT 20V MAX Cordless Impact Wrench
  2. 2 Seesii Impact Wrench 665 FT-LBS
    Best for the longest runtime

    Seesii Impact Wrench 665 FT-LBS

    9.5/10 our score

    See it on Amazon
  3. 3 DEWALT 20V MAX Cordless Impact Wrench
    Best for the hardest bolts

    DEWALT 20V MAX Cordless Impact Wrench

    9.4/10 our score

    See it on Amazon
  1. 4CRAFTSMAN V20 RP Cordless Impact WrenchCheck it
  2. 5Seesii 1000N.m

    Seesii 1000N.m

    Best for tight engine bays
    Check it
  3. 6Milwaukee 2962-20 M18 18V Fuel 1/2" Mid-torqueCheck it
  4. 7Milwaukee Electric

    Milwaukee Electric

    Best for compact access
    Check it
  5. 8kelyee 1/2" Cordless Impact Wrench 1107Ft-lbsCheck it
  6. 9AOBEN Cordless Impact Wrench 1/2 InchCheck it

The best 1/2 cordless impact wrenches for each job

The DEWALT DCF891B balances power and size better than anything else here, while the other eight picks win on torque, kit contents or reach. The notes under each card cover who the tool suits and where it gives ground to another pick.

1

DEWALT 20V MAX Cordless Impact Wrench: Best overall

DEWALT 20V MAX Cordless Impact Wrench, 1/2-inch cordless impact wrenches
9.6/10Our score
  • 600 ft-lbs max fastening torque
  • 800 ft-lbs max breakaway torque
  • 4 speed settings with variable speed trigger
  • Precision Wrench control
  • LED work light
  • Bare tool only

A compact 1/2-inch impact wrench with four speed settings, a precision control mode and a bare-tool price tier.

See it on Amazon

Pros

  • Precision Wrench helps limit overtightening
  • Compact and lightweight design
  • Four speed settings

Cons

  • Battery and charger sold separately
  • Lower torque than the Seesii and DEWALT 900 models here

This is the pick for most buyers because it does the everyday job without extra bulk. DEWALT rates it at 600 ft-lbs of fastening torque and 800 ft-lbs of breakaway, enough for car and light-truck lugs, pipe flanges and tilt wall braces.

At 4.3 lbs and 8.88 inches long, it works in tighter spots than the high-torque models and is easier to hold overhead or under a fender.

Four speed settings and a variable speed trigger let you match output to the fastener. Precision Wrench helps prevent overtightening in forward and run-off in reverse, which matters with small fasteners or nuts that might drop.

An LED work light covers dark wheel wells, and the hog ring anvil lets you swap sockets one-handed.

The trade-off is the bare-tool package: no battery or charger, so you need the DEWALT 20V line already. If you don't, the CRAFTSMAN kit below costs less overall.

Against the DCF900B, you give up 430 ft-lbs of fastening torque but gain a body you can handle with one hand all day.

DEWALT 20V MAX Cordless Impact WrenchCheck it on Amazon
2

Seesii Impact Wrench 665 FT-LBS: Best for the longest runtime

Seesii Impact Wrench 665 FT-LBS, 1/2-inch cordless impact wrenches
9.5/10Our score
  • 665 ft-lbs loosening torque
  • 579 ft-lbs tightening torque
  • 3300 IPM
  • Two 21V 4.0Ah batteries
  • 6 sockets and case
  • Brushless motor

Two 4.0Ah batteries and a full socket set make this a ready-to-work kit for heavy tire and equipment jobs.

See it on Amazon

Pros

  • Two batteries in the kit
  • Six sockets and a storage case
  • Three forward speeds plus reverse modes

Cons

  • Heavier than the DEWALT bare tools
  • Larger kit to store

This Seesii kit suits buyers who want everything in one box. It brings two 21V 4.0Ah batteries, six sockets from 14mm to 22mm and a storage case.

The brushless motor produces 665 ft-lbs of loosening torque and 579 ft-lbs of tightening torque, with 3300 IPM and 2400 RPM. Seesii says it installs wheel bolts in about 3 seconds and removes rusted bolts in around 5 seconds.

Three forward gears and two reverse modes let you move from delicate work to stubborn nuts without changing tools. An auto-stop function prevents over-tightening.

The 7.9-inch body weighs 5.6 lbs and sits on a balanced center of gravity. Tungsten steel anvil and alloy steel sockets add impact resistance for repeated heavy use.

The case has custom-cut foam inserts to hold the tool and sockets during transport.

Against the DEWALT DCF891B, this kit gives you batteries and sockets but a heavier, larger tool. It's the better buy for a first impact wrench and for work away from a shop outlet.

The metric socket set limits it on SAE fasteners.

Seesii Impact Wrench 665 FT-LBSCheck it on Amazon
3

DEWALT 20V MAX Cordless Impact Wrench: Best for the hardest bolts

DEWALT 20V MAX Cordless Impact Wrench, 1/2-inch cordless impact wrenches
9.4/10Our score
  • 1030 ft-lbs max fastening torque
  • 1400 ft-lbs max breakaway torque
  • Brushless motor
  • 4 speed settings
  • Precision Wrench control
  • Bare tool only

High torque for large flanges, rusted bolts and heavy equipment, in a heavier bare tool.

See it on Amazon

Pros

  • Highest torque in this group
  • Precision Wrench control
  • Battery Guard shock-absorbing connection

Cons

  • Heaviest DEWALT here
  • Battery and charger sold separately

The DCF900B is the heavy-duty DEWALT. Its 1030 ft-lbs of fastening torque and 1400 ft-lbs of breakaway torque top every other wrench in this group.

That's the spec to want for large pipe flanges, grooved couplings, concrete anchor bolts and rusted lug nuts on trucks. If a bolt has sat outside through a few winters, this is the class of tool that moves it.

It keeps the same Precision Wrench control and four speed settings as the smaller DCF891B, so you still get overtightening protection and LED brightness adjustment. Battery Guard adds a shock-absorbing connection between battery and tool to reduce wear.

The durable build resists common solvents. DEWALT backs it with a 3-year limited warranty.

The cost is size and weight. At 6.4 lbs and 8.43 inches long, it's a two-hand tool for most users and it won't slip into the gaps the compact models reach.

It's also a bare tool. Choose it when the bolts are genuinely tough, not for routine wheel swaps.

Against the Milwaukee Electric high-torque model, it offers more peak torque but a longer body.

DEWALT 20V MAX Cordless Impact WrenchCheck it on Amazon
4

CRAFTSMAN V20 RP Cordless Impact Wrench: Best for a complete kit

CRAFTSMAN V20 RP Cordless Impact Wrench, 1/2-inch cordless impact wrenches
9.3/10Our score
  • 700 ft-lbs max tightening torque
  • 1000 ft-lbs breakaway torque
  • Battery and charger included
  • 3 speed settings
  • LED light
  • Soft bag

Comes with a 4.0Ah battery, charger and soft bag, so you can work as soon as it arrives.

See it on Amazon

Pros

  • Battery and charger in the box
  • Brushless motor
  • Hog ring anvil for quick socket changes

Cons

  • Fewer control modes than the 4-speed DEWALT picks
  • No sockets included

CRAFTSMAN sells this as a ready-to-use kit, and that's its main draw. You get a 4.0Ah battery, a charger and a soft bag along with the wrench.

Its brushless motor delivers up to 700 ft-lbs of tightening torque and 1000 ft-lbs of breakaway torque. That places it just above the DEWALT DCF891B on paper and just below the high-torque picks.

The three speed settings and variable speed trigger give you control across jobs. A hog ring anvil makes socket changes quick, and the LED light helps in dim wheel wells.

The glass-filled nylon housing resists the solvents and fluids common in automotive work. The VERSATRACK compatibility lets you hang it on a wall rail in a small garage.

CRAFTSMAN backs it with a 3-year limited warranty.

Compare it with the Seesii kit: both include batteries, but CRAFTSMAN offers less breakaway torque and no sockets. Against the DEWALT bare tool, you trade some torque for charging out of the box.

It's the pick for a buyer with no V20 batteries who wants a single purchase.

CRAFTSMAN V20 RP Cordless Impact WrenchCheck it on Amazon
5

Seesii 1000N.m: Best for tight engine bays

Seesii 1000N.m, 1/2-inch cordless impact wrenches
9.2/10Our score
  • 738 ft-lbs max breakaway torque
  • 1000 N.m peak torque
  • 6.89-inch body
  • Two 4.0Ah batteries
  • 5 sockets and case
  • Brushless motor

A short body that fits narrow, deep spaces, backed by two batteries and a socket set.

See it on Amazon

Pros

  • Compact 6.89-inch length
  • Two batteries and fast charger
  • Three speeds up to 2400 RPM

Cons

  • Metric socket set only
  • Heavier kit than the bare tools

This Seesii model is the compact option. Its body measures 6.89 inches long and weighs 4.4 lbs, so it reaches bolts in narrow engine bays and deep wheel wells where longer wrenches fail.

Seesii rates peak torque at 1000 N.m, or 738 ft-lbs, with a top speed of 2400 RPM. That's more breakaway torque than the DCF891B's 600 ft-lbs of fastening torque, in a shorter body.

The kit includes two 4.0Ah batteries, a fast charger, five sockets from 17mm to 24mm, a 5-inch extension bar and a carrying case. The extension bar lets you reach recessed bolts without a separate trip to the store.

Three speeds from 0-1400 to 0-2400 RPM let you work at the right pace. Seesii offers replacement rather than repair on quality issues.

The sockets are metric only, so check your fasteners before you rely on the kit. The charger takes about 3 hours to fill a battery, which is slower than the other Seesii kit.

Against the DCF891B, it gives more fastening-torque headroom only in kit contents: batteries and sockets come in the box. It suits a buyer who needs reach more than a brand battery system.

Seesii 1000N.mCheck it on Amazon
6

Milwaukee 2962-20 M18 18V Fuel 1/2" Mid-torque: Best for controlled fastening

Milwaukee 2962-20 M18 18V Fuel 1/2" Mid-torque, 1/2-inch cordless impact wrenches
9.0/10Our score
  • Auto shut-off at 35 ft-lbs
  • Bolt removal control
  • Tri-LED lighting
  • Friction ring anvil
  • Tool only

Mid-torque power with an auto shut-off mode for hand-tight fastening and less overtightening.

See it on Amazon

Pros

  • Auto shut-off limits torque on small fasteners
  • Bolt removal control reduces dropped nuts
  • Tri-LED lighting

Cons

  • Battery and charger sold separately
  • Less peak torque than the high-torque picks

The Milwaukee 2962-20 is for buyers who value control over raw torque. Its Auto Shut-Off mode applies no more than 35 ft-lbs, so you can run fasteners to hand-tight without overtightening them.

Bolt Removal Control delivers full torque to break a nut loose, then drops RPM so the nut doesn't fall. Those two modes cover the jobs where a plain impact wrench is too blunt.

The friction ring anvil makes socket changes quick, and three LEDs light the work area with fewer shadows close to the socket. It's a mid-torque tool at 3.9 lbs and 10 inches long, so it sits below the high-torque picks on peak output.

That's the point: it's easier to handle for repeated fastening work.

Choose it for assembly and small fasteners where precision matters more than maximum breakaway force. It's a bare tool, so you need Milwaukee M18 batteries.

For the heaviest rusted bolts, one of the 1000 ft-lb models above is the better fit. The 2-year warranty is shorter than the 3-year cover on the DEWALT picks.

Milwaukee 2962-20 M18 18V Fuel 1/2" Mid-torqueCheck it on Amazon
7

Milwaukee Electric: Best for compact access

Milwaukee Electric, 1/2-inch cordless impact wrenches
8.7/10Our score
  • 1000 ft-lbs fixing torque
  • 1000 ft-lbs breakaway torque
  • 4-mode drive control
  • Friction ring anvil
  • All-metal drive train
  • Tool only

High torque in a short 7.6-inch body, so it reaches bolts in tight engine compartments.

See it on Amazon

Pros

  • Short 7.6-inch length
  • 1000 ft-lbs of torque
  • All-metal drive train

Cons

  • Battery and charger sold separately
  • Higher price tier than the mid-range picks

Milwaukee's high-torque model packs 1000 ft-lbs of torque into a 7.6-inch body. That short length is the selling point: it reaches bolts in tight engine compartments that a full-size high-torque wrench can't.

The 2.7 kg weight keeps it manageable for overhead work. Four-mode drive control spans 0-3000 RPM and 0-1500 IPM.

The all-metal drive train and friction ring anvil are built for repeated heavy use. It's compatible with all M18 batteries and chargers, and Milwaukee rates the 1000 ft-lbs with its REDLITHIUM FORGE batteries.

REDLINK PLUS intelligence protects against overload, overheat and over discharge.

Against the DCF900B, it trades about 30 ft-lbs of peak torque for a shorter, lighter body. That's the right trade for engine bay work and the wrong one for the biggest flanges.

Against the Milwaukee 2962-20, it adds far more torque in a shorter package but loses the 35 ft-lb Auto Shut-Off mode. It's a bare tool, so the battery cost adds up.

Milwaukee ElectricCheck it on Amazon
8

kelyee 1/2" Cordless Impact Wrench 1107Ft-lbs: Best for rusted nuts

kelyee 1/2" Cordless Impact Wrench 1107Ft-lbs, 1/2-inch cordless impact wrenches
8.5/10Our score
  • 1107 ft-lbs torque
  • 1500 N.m
  • Two 4.0Ah batteries
  • Fast charger
  • 3 smart modes
  • 4 sockets and case

Very high torque in a kit with two batteries and four sockets, for stubborn fasteners.

See it on Amazon

Pros

  • Highest torque figure in this group
  • Two batteries and fast charger
  • Forward and reverse auto-stop modes

Cons

  • Heaviest kit here
  • Fewer sockets than the Seesii kits

The kelyee is the torque monster of this group, rated at 1107 ft-lbs (1500 N.m). That's the figure to reach for when you face rusted nuts, old bolts and heavy equipment that has sat outdoors.

A brushless motor runs cooler and quieter than brushed designs, and the kit includes two 4.0Ah batteries plus a fast charger. The two batteries give you a spare while one charges.

Three modes cover lock, forward and reverse auto-stop for safer loosening. An LED light runs for 10 seconds after you release the trigger.

Four sockets (17 to 22mm), an extension bar and a tool case round out the kit. The rubberized grip and shock-absorbing foot reduce hand fatigue. kelyee offers 2-year support on the wrench and 1-year on the battery.

The trade-off is weight and bulk. With two batteries and a case, it's the heaviest kit here.

The 3-mode setup is simpler than the 4-mode controls on the DEWALT and Milwaukee picks. Choose it for stubborn fasteners and heavy equipment, not for routine light work.

kelyee 1/2" Cordless Impact Wrench 1107Ft-lbsCheck it on Amazon
9

AOBEN Cordless Impact Wrench 1/2 Inch: Best for light home jobs

AOBEN Cordless Impact Wrench 1/2 Inch, 1/2-inch cordless impact wrenches
8.3/10Our score
  • 600 N.m forward torque
  • 800 N.m reverse torque
  • 3500 IPM
  • 4.0Ah battery
  • Fast charger
  • 6 sockets and case

A compact kit for car and RV tires and general assembly, with a single battery.

See it on Amazon

Pros

  • Six sockets and a tool case
  • Brushless motor
  • Two-hour charge time

Cons

  • One battery only
  • Lowest torque in this group

The AOBEN kit suits light home jobs. It's rated at 600 N.m (450 ft-lbs) of forward torque and 800 N.m of reverse torque, with up to 3500 IPM and 2400 RPM.

A single 4.0Ah battery and charger are included, and the battery charges in about 2 hours. The power indicator on the battery shows the charge level at a glance.

The brushless motor offers variable speed across three ranges. The kit comes with six sockets from 17mm to 22mm and a portable tool case.

A reverse brake-stop function reduces free spinning after a fastener loosens. AOBEN lists car and RV tire maintenance, mower blade replacement and general assembly as the main uses.

Against the higher-torque picks, this one is best for car and RV tire work and general assembly rather than heavy equipment. The single battery is the main limit for long sessions.

It's also the lowest torque figure in the group at 450 ft-lbs forward. It's a sensible first wrench for a home garage where the jobs are light and spread out.

AOBEN Cordless Impact Wrench 1/2 InchCheck it on Amazon

How these 1/2-inch impact wrenches compare

The comparison table lines up torque, drive size and what comes in the box. Read it across each row rather than down a single column: the top-torque tools are also the heaviest, and the lightest bare tools are the ones that ask you to supply batteries.

That pattern holds for nearly every pick here.

ProductBest forDrive sizeMax fastening torqueMax breakaway torqueOur score
DEWALT 20V MAX Cordless Impact Wrenchoverall1/2 in600 ft-lbs800 ft-lbs9.6
Seesii Impact Wrench 665 FT-LBSthe longest runtime1/2 in9.5
DEWALT 20V MAX Cordless Impact Wrenchthe hardest bolts1/2 in1030 ft-lbs1400 ft-lbs9.4
CRAFTSMAN V20 RP Cordless Impact Wrencha complete kit1/2 in700 ft-lbs9.3
Seesii 1000N.mtight engine bays1/2 in9.2
Milwaukee 2962-20 M18 18V Fuel 1/2" Mid-torquecontrolled fastening1/2 in9.0
Milwaukee Electriccompact access1/2 in8.7
kelyee 1/2" Cordless Impact Wrench 1107Ft-lbsrusted nuts1/2 in8.5
AOBEN Cordless Impact Wrench 1/2 Inchlight home jobs1/2 in8.3

How we compared these wrenches

We checked the specs and features for each wrench and weighed them against what a 1/2-inch impact wrench buyer needs most. Fastening torque, breakaway torque and speed settings carry the most weight, since those decide which bolts a tool can move.

Kit contents, body size and weight come next, because they decide whether the wrench works out of the box and fits where you need it. We also looked at control features like Precision Wrench and auto shut-off.

Our score weighs specs, features and buyer feedback against what you're shopping for.

Some brands list fastening torque and breakaway torque separately, while others publish a single peak number. The DEWALT picks separate the two clearly.

The Seesii, kelyee and AOBEN kits lean on peak or loosening figures. Compare like with like, and treat the larger of two numbers from one brand as its loosening rating.

Which torque level do you actually need?

Match the torque rating to your most stubborn fastener and ignore the biggest number on the page. A car lug nut needs 80 to 150 ft-lbs of tightening, so a 450 to 700 ft-lb wrench leaves headroom for rust.

Anything rated near 1000 ft-lbs or more is for heavy trucks, large flanges and equipment that has sat outside. If you mostly do routine wheel swaps, a mid-range wrench is lighter to handle all day.

If you also break loose equipment bolts, the high-torque tier earns its weight.

Light home and car work

The AOBEN kit at 450 ft-lbs forward and the DEWALT DCF891B at 600 ft-lbs fastening cover this tier. Wheel swaps, mower blades and general assembly sit here.

Both are light enough to hold for a full set of wheels without arm fatigue.

Daily shop and light-truck work

The CRAFTSMAN kit at 700 ft-lbs and the Seesii 665 ft-lbs kit land in this band. They handle light-truck lugs and repeated fastening through a workday.

A second battery or a fast charger matters more here than another few hundred ft-lbs.

Heavy equipment and rusted bolts

The DEWALT DCF900B at 1030 ft-lbs, the kelyee at 1107 ft-lbs and the Milwaukee Electric at 1000 ft-lbs belong here. Large flanges, concrete anchors and fasteners that have sat outdoors need this class.

Expect more weight in exchange for the force.

Should you buy a bare tool or a kit with batteries?

Buy the kit when you don't already own batteries in that brand's line. The Seesii and CRAFTSMAN options here include batteries and chargers, so they work on arrival.

Buy the bare tool when you already have compatible batteries, since the DEWALT and Milwaukee picks cost less without them. Check which battery platform you're already invested in before comparing prices.

What the kits include

The Seesii 665 ft-lbs kit adds two 4.0Ah batteries, six sockets and a case. The Seesii 1000N.m kit adds two batteries, five sockets, an extension bar and a case.

The CRAFTSMAN kit adds a 4.0Ah battery, charger and soft bag but no sockets. The kelyee kit adds two batteries and four sockets.

The AOBEN kit adds one battery and six sockets. The Milwaukee 2962-20 and both DEWALT wrenches ship as tools only.

What the bare tools assume

The DEWALT bare tools assume you own 20V MAX batteries and a charger. The Milwaukee bare tools assume M18 batteries.

If you own neither, add the cost of a starter kit before you compare totals. The battery platform you already own should decide the brand more than a few ft-lbs.

What do the speed settings and control modes do?

More speed settings let you match output to the fastener instead of running everything at full power. Four settings on the DEWALT DCF891B and DCF900B give you finer control than a simple trigger.

Precision Wrench limits overtightening in forward and run-off in reverse. Milwaukee's Auto Shut-Off caps torque at 35 ft-lbs for small fasteners.

These modes matter most for assembly and light fastening, not for wheel lugs.

Forward control versus reverse control

Forward settings set how hard the tool tightens. Reverse settings set how hard it breaks a fastener loose and what happens after.

The Milwaukee 2962-20's Bolt Removal Control drops RPM once the nut spins free, so it doesn't fly off. The Seesii kits add a short-rotation reverse mode.

The kelyee and AOBEN kits add a reverse auto-stop or brake-stop for the same reason. Use the low gear for small fasteners and trim work, the middle gear for standard lug nuts and the top gear for stubborn nuts.

When a mode limits torque, trust it: run the fastener to hand-tight and finish with a torque wrench where the spec matters.

How much does body size affect where you can work?

A short body reaches bolts in tight engine bays and deep wheel wells. The Seesii 1000N.m at 6.89 inches and the Milwaukee Electric at 7.6 inches are the compact picks here.

The DEWALT DCF900B at 8.43 inches and the kelyee kit are the largest. If you work mostly under a hood or in confined spaces, size matters more than the last few hundred ft-lbs.

For open wheel work, a longer, heavier tool is easier to control.

Every pick here uses a 1/2-inch square drive. The DEWALT and CRAFTSMAN models use a hog ring anvil, which holds the socket by friction so you can pull it off and push a new one on without tools.

The Milwaukee picks use a friction ring, which works the same way. A hog ring or friction ring is faster than a detent pin for jobs where you change sockets often.

Measure the gap you work in before you buy: a 6.89-inch body slips into spaces a 10-inch Milwaukee 2962-20 can't, but a longer body gives you more room to brace the tool when a bolt is stuck.

1/2-inch or 3/4-inch drive: which should you buy?

A 1/2-inch drive covers car and light-truck lugs plus most general fastening. Step up to a 3/4 cordless impact wrench when you work on heavy trucks, large flanges or bolts that need bigger sockets and more torque.

Most home and light shop buyers never need the larger drive. If you're unsure which powered tool fits your work, our cordless ratchet vs impact wrench comparison explains where each one earns its place.

For torque checking rather than loosening, see our guide to the best electric torque wrench.

When 1/2-inch is enough

Stick with 1/2-inch for wheel lugs, suspension work, engine mounts and general assembly. The socket range is wide and the tools are lighter.

All nine picks here fall in this class, so the choice comes down to torque and kit, not drive size.

When to move up to 3/4-inch

Move up when the socket itself needs to be larger than 1/2-inch drive supports, or when a bolt needs more force than these wrenches deliver. Heavy truck lugs, large pipe flanges and structural bolts push into that range.

A 3/4-inch tool is heavier and needs its own sockets, so buy it only when the work demands it.

Verdict: which 1/2 cordless impact wrench should you buy?

For most people the answer is the DEWALT DCF891B. It's the best 1/2 cordless impact wrench overall because 600 ft-lbs of fastening torque and 800 ft-lbs of breakaway cover car and light-truck work, and the compact body fits where high-torque guns don't.

Buy the CRAFTSMAN kit if you want a battery and charger in the box. Choose the DEWALT DCF900B for the hardest bolts, the Seesii 1000N.m or Milwaukee Electric for tight spaces, and the kelyee for rusted fasteners.

If you already run Milwaukee batteries, the 2962-20's Auto Shut-Off is the reason to pick it. And if your shop also greases equipment, our DeWalt vs Milwaukee grease gun comparison helps you keep the same battery platform.

Our top 3 picks at a glance

  1. 1 DEWALT 20V MAX Cordless Impact Wrench
  2. 2 Seesii Impact Wrench 665 FT-LBS
    Best for the longest runtime

    Seesii Impact Wrench 665 FT-LBS

    9.5/10 our score

    See it on Amazon
  3. 3 DEWALT 20V MAX Cordless Impact Wrench
    Best for the hardest bolts

    DEWALT 20V MAX Cordless Impact Wrench

    9.4/10 our score

    See it on Amazon

Frequently asked questions

What is the best 1/2 cordless impact wrench for home use?

The DEWALT DCF891B is the best pick for most homes, with 600 ft-lbs of fastening torque and 800 ft-lbs of breakaway torque. For occasional light jobs the AOBEN kit is enough.

Do I need a 1/2-inch or 3/4-inch impact wrench?

A 1/2-inch drive covers lug nuts on cars and light trucks plus most general fastening. Go to a 3/4-inch drive when you work on heavy trucks or large flanges that need more socket size and torque.

Is breakaway torque the same as fastening torque?

No. Breakaway torque is the force used to loosen a stuck fastener, while fastening torque is the force used to tighten one.

A wrench often rates breakaway torque higher than its fastening torque.

How much torque do I need for lug nuts?

Most car and light truck lug nuts need 80 to 150 ft-lbs. A 1/2-inch wrench with 450 to 700 ft-lbs of torque leaves headroom for rust and repeated use.

Will an impact wrench loosen overtightened lug nuts?

A high-torque 1/2-inch wrench rated near 1000 ft-lbs or more can loosen many overtightened nuts. If a nut still won't move, use a breaker bar and the right socket rather than forcing the wrench.